≡
[01:44:09] <bill-auger> > AgonLight2 can be powered by 3 sources:
[01:44:09] <bill-auger> > • USB-C connector;
[01:44:09] <bill-auger> > • Li-Po battery connector;
[01:44:10] <bill-auger> > • GPIO.pin2 (5V_USB) note that this wire is connected to the 5V of the USB so when you power AgonLight2 from GPIO.pin2 – you should not connect have USB cable attached at the same time!!!
IRC #olimex 2024-04-19
[01:43:05] <bill-auger> feoh: did you get the manual https://github.com/OLIMEX/AgonLight2/blob/main/DOCUMENTATION/AgonLight2-user-manual.pdf[01:44:09] <bill-auger> > AgonLight2 can be powered by 3 sources:
[01:44:09] <bill-auger> > • USB-C connector;
[01:44:09] <bill-auger> > • Li-Po battery connector;
[01:44:10] <bill-auger> > • GPIO.pin2 (5V_USB) note that this wire is connected to the 5V of the USB so when you power AgonLight2 from GPIO.pin2 – you should not connect have USB cable attached at the same time!!!
