Wired and Wireless ethernet problem A20 Lime2

Started by sdrollinger, March 14, 2018, 08:35:46 PM

Previous topic - Next topic

sdrollinger

Hello,

I have a wired Ethernet connection and a wireless connection.  I'm using the wired Ethernet to communicate to a computer not on the network which collects data and puts it in a local (olimex) MySQL database.  Then we query the information from the MySQL database from the wireless network.

The problem I'm having is if the wired Ethernet connection is made (plugged in) I can't query from MySQL.  Also if I ssh into the device from USB I can't ping anything on the wireless network.  Once the wired Ethernet is disconnected everything works again.

Here is the contents of /etc/network/interfaces
****************
auto lo
iface lo inet loopback

auto eth0

iface eth0 inet static
address 192.168.200.100
netmask 255.255.255.0
hwaddress ether 00:80:A3:99:B4:C6

auto usb0
#iface usb0 inet dhcp
iface usb0 inet static
address 192.168.2.1
netmask 255.255.255.0
#gateway 192.168.2.1

#auto wlan1
iface wlan1 inet dhcp
wpa-ssid YourSSID
wpa-psk YourPass
*****************

The wlan gets assigned an address something like 10.24.64.xxx
Any help would be appreciated.

In the MySQL config file my.cnf
bind-address = 0.0.0.0
I read this should make it listen on all interfaces.

Thank you,

Steve


Gerrit

What is the output from ifconfig and route with and without the ethernet connection ?

sdrollinger

#2
Sorry guys, this is not what's happening. When the the eth0 is connected everything is still working fine.  The only problem we are experiencing is querying MySQL from the wlan interface if the eth0 is also connected.  I will post the my.cnf file as well.

Here is the route information

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         192.168.200.100 0.0.0.0         UG    0      0        0 eth0
10.24.64.0      *               255.255.252.0   U     0      0        0 wlan6
192.168.2.0     *               255.255.255.0   U     0      0        0 usb0
192.168.200.0   *               255.255.255.0   U     0      0        0 eth0

Here is the ifconfig information
eth0      Link encap:Ethernet  HWaddr 00:80:a3:99:b4:c6
          inet addr:192.168.200.100  Bcast:192.168.200.255  Mask:255.255.255.0
          inet6 addr: fe80::280:a3ff:fe99:b4c6/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:6747 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8474 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:931100 (909.2 KiB)  TX bytes:715100 (698.3 KiB)
          Interrupt:117 Base address:0x8000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:19649 errors:0 dropped:0 overruns:0 frame:0
          TX packets:19649 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2383977 (2.2 MiB)  TX bytes:2383977 (2.2 MiB)

usb0      Link encap:Ethernet  HWaddr 7e:dd:30:6d:41:28
          inet addr:192.168.2.1  Bcast:192.168.2.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan6     Link encap:Ethernet  HWaddr c8:3a:35:b0:10:0f
          inet addr:10.24.64.198  Bcast:10.24.67.255  Mask:255.255.252.0
          inet6 addr: fe80::ca3a:35ff:feb0:100f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:12623 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14614 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1186124 (1.1 MiB)  TX bytes:4519001 (4.3 MiB)


my.cnf

#
# The MySQL database server configuration file.
#
# You can copy this to one of:
# - "/etc/mysql/my.cnf" to set global options,
# - "~/.my.cnf" to set user-specific options.
#
# One can use all long options that the program supports.
# Run program with --help to get a list of available options and with
# --print-defaults to see which it would actually understand and use.
#
# For explanations see
# http://dev.mysql.com/doc/mysql/en/server-system-variables.html

# This will be passed to all mysql clients
# It has been reported that passwords should be enclosed with ticks/quotes
# escpecially if they contain "#" chars...
# Remember to edit /etc/mysql/debian.cnf when changing the socket location.
[client]
port      = 3306
socket      = /var/run/mysqld/mysqld.sock

# Here is entries for some specific programs
# The following values assume you have at least 32M ram

# This was formally known as [safe_mysqld]. Both versions are currently parsed.
[mysqld_safe]
socket      = /var/run/mysqld/mysqld.sock
nice      = 0

[mysqld]
#
# * Basic Settings
#
user      = mysql
pid-file   = /var/run/mysqld/mysqld.pid
socket      = /var/run/mysqld/mysqld.sock
port      = 3306
basedir      = /usr
datadir      = /var/lib/mysql
tmpdir      = /tmp
lc-messages-dir   = /usr/share/mysql
skip-external-locking
#
# Instead of skip-networking the default is now to listen only on
# localhost which is more compatible and is not less secure.
#bind-address      = 10.24.64.198
bind-address      = 127.0.0.1
#bind-address      = 0:0:0:0
#
# * Fine Tuning
#
key_buffer      = 16M
max_allowed_packet   = 16M
thread_stack      = 192K
thread_cache_size       = 8
# This replaces the startup script and checks MyISAM tables if needed
# the first time they are touched
myisam-recover         = BACKUP
#max_connections        = 100
#table_cache            = 64
#thread_concurrency     = 10
#
# * Query Cache Configuration
#
query_cache_limit   = 1M
query_cache_size        = 16M
#
# * Logging and Replication
#
# Both location gets rotated by the cronjob.
# Be aware that this log type is a performance killer.
# As of 5.1 you can enable the log at runtime!
#general_log_file        = /var/log/mysql/mysql.log
#general_log             = 1
#
# Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf.
#
# Here you can see queries with especially long duration
#log_slow_queries   = /var/log/mysql/mysql-slow.log
#long_query_time = 2
#log-queries-not-using-indexes
#
# The following can be used as easy to replay backup logs or for replication.
# note: if you are setting up a replication slave, see README.Debian about
#       other settings you may need to change.
#server-id      = 1
#log_bin         = /var/log/mysql/mysql-bin.log
expire_logs_days   = 10
max_binlog_size         = 100M
#binlog_do_db      = include_database_name
#binlog_ignore_db   = include_database_name
#
# * InnoDB
#
# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/.
# Read the manual for more InnoDB related options. There are many!
#
# * Security Features
#
# Read the manual, too, if you want chroot!
# chroot = /var/lib/mysql/
#
# For generating SSL certificates I recommend the OpenSSL GUI "tinyca".
#
# ssl-ca=/etc/mysql/cacert.pem
# ssl-cert=/etc/mysql/server-cert.pem
# ssl-key=/etc/mysql/server-key.pem



[mysqldump]
quick
quote-names
max_allowed_packet   = 16M

[mysql]
#no-auto-rehash   # faster start of mysql but no tab completition

[isamchk]
key_buffer      = 16M

#
# * IMPORTANT: Additional settings that can override those from this file!
#   The files must end with '.cnf', otherwise they'll be ignored.
#
!includedir /etc/mysql/conf.d/

martinayotte

Two strange things :
- your default gateway is currently the IP of the board itself, it should be the IP of your router.
- the MySQL bind-address isn't 0.0.0.0, like you mentioned earlier.