Expands the functionality of Olimex OpenOCD debuggers. Adds the ability to use SWD programming interface (in addition to the JTAG interface).
Plug-in adapter for ARM-USB-OCD, ARM-USB-OCD-H, ARM-USB-TINY, ARM-USB-TINY-H that allows ARM processors to be programmed/debugged via Serial Wire Debug (SWD)
Tested and working with OpenOCD and Rowley Crossworks
Dimensions 50x40 mm (2x1.6") + 20 cm (8") JTAG cable
IMPORTANT: Connect the adapter to Olimex programmers in the following way: JTAG debugger – SWD interface – JTAG ribbon cable; i.e. connect the SWD adapter directly to the programmer with no cable in-between them!
Does ARM-JTAG-SWD work with OpenOCD? How can I make it work?
Yes, ARM-JTAG-SWD works with OpenOCD.
Make sure you're using OpenOCD version 0.9.0 or later. The command to establish a connection between a debugger, the ARM-JTAG-SWD adapter and a target board looks like this:
openocd.exe -f interface/ftdi/olimex-arm-usb-tiny-h.cfg -f interface/ftdi/olimex-arm-jtag-swd.cfg -f target/stm32f1x.cfg , where openocd.exe - the executable for openocd, usually located in folder "bin" or "bin-x64" olimex-arm-usb-tiny-h.cfg - configuration file for test debugger ARM-USB-TINY-H (varies depending on debugger); olimex-arm-usb-tiny-swd.cfg - configuration file for the SWD adapter; stm32f1x.cfg - configuration file for the test target STM32F107 (varies depending on target).
Does ARM-JTAG-SWD work with ARM-JTAG-COOCOX?
It is unnecessary since ARM-JTAG-COOCOX supports SWD without the need of an adapter board.
Does ARM-JTAG-SWD work with ARM-JTAG-EW?
Same as above. It is unnecessary since ARM-JTAG-EW supports SWD without need of an adapter board.
Related Products - People who bought this product also bought